UltraSpart™ 100 is a two-component, low VOC, aliphatic polyaspartic coating designed as a UV stable topcoat for polyurea and polyurethane systems, or as a standalone rapid return to service system...

One component, solvent-free moisture curing rapid drying polyurethane surface membrane primer. Use on cement-based substrates that are not subject to rising damp, but have a residual humidity.

HydroFort™ PU is a highly elastic, class 3, single component, liquid applied, polyurethane waterproofing membrane system that complies with AS/NZS 4858. HydroFort™ PU forms a tough, durable membrane...

Fortis UltraCrete™ 3KPU is our urethane-based system is a heavy-duty seamless resurfacer that provides exceptional durability and service.

FORTIS AD515 is a fast-curing, water-resistant and odourless assembly adhesive with very high adhesive strength. Due to its unique composition, this adhesive combines all the properties of the...

FORTIS AD512 is a universal adhesive paste to glue concrete block, floorboards, strip flooring. yellow tongue, sound-insulating rubber, traffic control tactiles and timber to steel.

FORTIS AD5045-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 4-minute open time for finger jointing. It is used for fast processing of finger-jointin...

FORTIS AD525 is a self-levelling, 100% solids two-component, rapid curing polyurea elastomer control joint filler. Designed for concrete slabs and roadways It is flexible enough to handle 10-15%...

FORTIS AD5305-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 30-minute open time. It is used where slower layup of the glue lamination is required. I...

FORTIS AD5025-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 2-minute open time for finger jointing. It is used for fast processing of finger...

FORTIS AD5205-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 20 minute open time. It is used for fast processing glue laminated timber.

PU 80 is a fast foaming polyurethane adhesive and insulation foam used to seal around windows and doors during construction.

FORTIS AD5505-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 50-minute open time. It is used where slower layup of the glue lamination is required. I...

Excellent polyurethane for a multitude of bonding substrates, from timber, veneers, FRP, Fibreglass and Composite Laminating Adhesive

A superior sprayable, brushable and roller applied adhesive specifically for stainless benchtop laminating and colorbond to foam.

Concrete Shield™ AcrylaPave is a fast-drying acrylic paving sealer. It provides a protective gloss layer which provides resistance to oil, grease, dust and dirt.

Fortis AD5205 D4 PU adhesive is a universal, solvent-free, one-component, water-resistant, wood adhesive for all kinds of exterior applications. It is a medium-drying with small amount of foaming.

FORTIS PA75 is a very high-quality heat-resistant carbon/polyurethane-based contact adhesive for the adhesion of various types of vinyl, rubbers and laminates.

Concrete Shield™ AcrylaSeal Concrete Sealer is a fast-drying water-based acrylic concrete sealer. Recommended for use on concrete driveways and for sealing factory floors. Suitable for untreated...

A fast curing polyurethane specific for bonding gripper and metal trims to concrete surfaces.

Concrete Shield™ AcrylaPolish is a premium grade fast-drying water-based acrylic polyurethane sealer/polish. It provides a highly durable and protective gloss ‘wet-look’ layer leaving the concrete...

Fortis AquaCoat™ is an ultra-low VOC, high solids, two-pack water-based epoxy floor coating designed for use on concrete floors in areas of pedestrian traffic, light to medium vehicle traffic, and...