Your search for "coatings polyaspartic-coating polyaspartic-85-solids-non-yellowing" was found in 18 product lines, 58 products, 3 distributors, 7 resources, 8 industries, and 4 pages.
If you can't find what you're looking for, try a Google-powered search, or contact us.
FORTIS COAT 519 – A premium non-yellowing clear single pack polyurethane floor coating. Specifically designed for use on concrete and timber to provide a long-lasting protective coating that does not...
FORTIS PRIME 520 water based polyurethane.
UltraSpart™ 100 is a two-component, low VOC, aliphatic polyaspartic coating designed as a UV stable topcoat for polyurea and polyurethane systems, or as a standalone rapid return to service system...
FORTIS COAT 526 is a high-performance water-based clear polyurethane that provides a natural look to concrete and timber substrates. Available in Gloss and Satin.
Fortis Coat 527 is a two-part non-yellowing polyurethane coating with good chemical resistance and exterior durability.
HydroFort™ PU is a highly elastic, class 3, single component, liquid applied, polyurethane waterproofing membrane system that complies with AS/NZS 4858. HydroFort™ PU forms a tough, durable membrane...
Concrete Shield™ Grout 1000 is a high-performance grout for use with polished concrete and terrazzo floors.
High protective Anti Graffiti clear coating
Concrete Shield™ AcrylaSeal Concrete Sealer is a fast-drying water-based acrylic concrete sealer. Recommended for use on concrete driveways and for sealing factory floors. Suitable for untreated...
Concrete Shield™ AcrylaPolish is a premium grade fast-drying water-based acrylic polyurethane sealer/polish. It provides a highly durable and protective gloss ‘wet-look’ layer leaving the concrete...
Concrete Shield™ AcrylaPave is a fast-drying acrylic paving sealer. It provides a protective gloss layer which provides resistance to oil, grease, dust and dirt.
A single component adhesion promoter.
Fortis Non-Slip Additive embeds into the coating to provide a textured finish which reduces the slip hazard associated with coated floor surfaces. Compatible with many coatings, including all Fortis...
A high moisture resistance Non-Toxic Water-Based PVA adhesive for interior and exterior applications.
Concrete Shield™ Natural Look Enhancer is ready to use penetrating water and oil repellent based on blended polymers in a non-flammable solvent. It penetrates deeply and reduces capillary absorbency...
Fast setting Water-Based non-toxic PVA specifically designed for bonding MDF.
Concrete Shield™ Wet Look Enhancer is ready to use penetrating water and oil repellent based on blended fluorinated polymers in a non-flammable solvent. It has an unusual property in that it dries...
A Water-Based Non-Toxic melamine glue bonding melamine faced board in the manufacture of cabinets and drawers. Dries Clear.
Fortis Antique Green Acid Stain is a concentrated penetrating reactive stain which chemically combines with cured concrete to produce permanent variegated colouring effects. The aged antique appearanc...
Fortis Antique Tan Acid Stain is a concentrated penetrating reactive stain which chemically combines with cured concrete to produce permanent variegated colouring effects. The aged antique appearance...
FORTIS AD512 is a universal adhesive paste to glue concrete block, floorboards, strip flooring. yellow tongue, sound-insulating rubber, traffic control tactiles and timber to steel.
HydroFort™ VB (Vapour Barrier) is a low VOC water-based epoxy vapour barrier.
Fortis Antique Black Acid Stain is a concentrated penetrating reactive stain which chemically combines with cured concrete to produce permanent variegated colouring effects. The aged antique appearanc...
Fortis Antique Tan Acid Stain is a concentrated penetrating reactive stain which chemically combines with cured concrete to produce permanent variegated colouring effects. The aged antique appearance...
Fast-drying, high tack contact spray adhesive with high-temperature resistance
A superior sprayable, brushable and roller applied adhesive specifically for stainless benchtop laminating and colorbond to foam.
Fortis Antique Blue Acid Stain is a concentrated penetrating reactive stain which chemically combines with cured concrete to produce permanent variegated colouring effects. Aged antique appearance is...
Xylene based Thinner for Epoxy Floor coatings
Fortis AD5205 D4 PU adhesive is a universal, solvent-free, one-component, water-resistant, wood adhesive for all kinds of exterior applications. It is a medium-drying with small amount of foaming.
Fortis Antique Red Acid Stain is a concentrated penetrating reactive stain which chemically combines with cured concrete to produce permanent variegated colouring effects. The aged antique appearance...
Excellent polyurethane for a multitude of bonding substrates, from timber, veneers, FRP, Fibreglass and Composite Laminating Adhesive
FORTIS AD213 will bond a wide variety of substrates, including wood, metals, rubber, fabric, most plastics, cardboard, polythene and concrete.
FORTIS AD211-PS is a high tack solvent-based contact adhesive. FORTIS AD211-PS offers high initial grab and has been formulated for use in the bonding of polystyrene and other lightweight insulation...
FORTIS AD215. Brush Contact Adhesive that is heat resistant. A HIGH-QUALITY contact adhesive with excellent brushing consistency.
Fortis UltraCrete™ 3KPU is our urethane-based system is a heavy-duty seamless resurfacer that provides exceptional durability and service.
FORTIS AD225 is a premium grade cross-linkable contact adhesive. FORTIS AD225 is fast drying, and provides excellent adhesion to difficult to bond substrates, including but not limited to: plastics,...
FORTIS COAT 823 HS is a high solid, high build, two-pack epoxy floor coating designed for applications demanding high structural integrity. FORTIS COAT 823 HS is available in colour and clear. Refer...
FORTIS COAT 824 SL is a self-levelling solvent-free two-pack epoxy floor coating designed for build coats from 5mm to 40 mm. FORTIS COAT 824 SL is available in clear for metallic flooring and in...
Fortis AquaCoat™ is an ultra-low VOC, high solids, two-pack water-based epoxy floor coating designed for use on concrete floors in areas of pedestrian traffic, light to medium vehicle traffic, and...
A high solid clear epoxy primer that reinstates and primes poor concrete surfaces before application the application of topcoats.
Fortis AD822 Epoxy Adhesive. Two-Part high Strength Solvent Free Epoxy Adhesive that is easy to mix and apply.
FORTIS AD525 is a self-levelling, 100% solids two-component, rapid curing polyurea elastomer control joint filler. Designed for concrete slabs and roadways It is flexible enough to handle 10-15%...
FORTIS AD515 is a fast-curing, water-resistant and odourless assembly adhesive with very high adhesive strength. Due to its unique composition, this adhesive combines all the properties of the...
A fast cure solvent-based epoxy primer for concrete substrates before application of topcoats including flake floor. Available in Clear and Light Grey
Fortis 822 Ultra Clear is casting resin for crystal clear, high gloss casting applications.
Made of 304 polished stainless steel, Jiffy mixers are perfect for mixing epoxies, polyurethanes & polyaspartic.
Concrete Shield™ CCA is a concentrated biodegradable organic acidic cleaning and etching solution for use before coating.
FORTIS PA75 is a very high-quality heat-resistant carbon/polyurethane-based contact adhesive for the adhesion of various types of vinyl, rubbers and laminates.
FORTIS GLUE RELEASE is a temporary water-based wax emulsion coating that allows surfaces to repel glue, adhesives and resins. It coats and protects equipment from dried glue mess and reduces...
FORTIS AD5305-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 30-minute open time. It is used where slower layup of the glue lamination is required. I...
600 ml (1:1 & 2:1) 26:1 High Thrust Dual Component Cartridge Gun
One component, solvent-free moisture curing rapid drying polyurethane surface membrane primer. Use on cement-based substrates that are not subject to rising damp, but have a residual humidity.
FORTIS AD5205-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 20 minute open time. It is used for fast processing glue laminated timber.
FORTIS AD5505-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 50-minute open time. It is used where slower layup of the glue lamination is required. I...
FORTIS AD5045-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 4-minute open time for finger jointing. It is used for fast processing of finger-jointin...
FORTIS AD5025-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 2-minute open time for finger jointing. It is used for fast processing of finger...
Choosing the correct adhesive for woodworking — especially door, window, and stair construction — is essential to ensure longevity, easy-of-use, and the overall aesthetics of the project. There are a huge variety …
Fortis Adhesives & Coatings Pty Ltd Established in 2008, Fortis setup in Dandenong South, Victoria as an Australian Made and Owned manufacturer of Adhesives, Epoxy Coatings and Non-Yellowing Polyurethane coatings for Melbourne …
Concrete Surfaces often suffer from wear and tear, heavy traffic, abrasion, and impact, leading to deterioration over time. In environments like garages, industrial floors, warehouses, and even domestic spaces like carparks and …
Unprotected Concrete such as driveways, pavers, and floors can be easily damaged, with the most common causes including water damage and unwanted staining, as well as general wear and tear. Once the …
Many of our colours are based on AS2700 range of colours to allow specifiers to select reference paint colours for industrial coatings. The colours displayed will differ depending upon the computer and …
Rejection, commonly known, as Silicon Effect is a pullback of a coating applied to a substrate. Rejection of coatings on floor surfaces is typically caused by contaminants. The most common contaminants are: …
De-lamination of coatings can occur between the coating system and the substrate. Causes of de-lamination The possible causes for de-lamination are: Contamination Inadequate surface preparation Incompatibility 1. Contamination Contamination can be on …
The use of Fortis coatings across the varied climates of Australia does provide some challenges. To achieve the best coating, it is always best to follow the product's application guidelines. Temperature, humidity, …
Applying Acid Stains Prepare concrete ready for application of clear coating. As per Technical note#4. The concrete needs to contain sufficient Calcium for the stain to react. If the concrete has been …
What Causes Hot Tyre Staining (Paw Printing)? Tyres are made of a mixture of synthetic and natural rubbers, fillers and additives. The major fillers are carbon black and silica. Carbon black not …
For the flooring contractor hired to apply or repair a coating on a concrete floor, the range of tools and possible techniques available for surface preparation can be extensive. Surface preparation methods …
Extremely durable and hard wearing, suitable for concrete garages and workshops floors.
Polyurethanes are the preferred choice for seamless waterproofing membranes.
Fast lamination and bonding can only be achieved with Contact Adhesives.
A long lasting Anti-graffiti coating to protect against unwanted graffiti.
Highly water repellent penetrating sealers for concrete, sandstone & brick.
Performance polyurethane high build mortars that are chemical and thermal shock resistant..
A complete range of industrial epoxy floor coating systems for factories, carparks and garages.
Epoxy and Polyurethane Thinners slow the cure of coatings and reduce the viscosity.
Structural Polyurethane Lamination Adhesive for glulam producers.
Choose the right mixing tools and rollers to ensures coating application is done correctly.
Concrete preparation is cleaning is crucial before applying any floor coatings.
The traditional way to stain concrete for a stunning effect is achieved with Concrete Acid Stains.
Easy-to-apply sealers for a professional and long-lasting finish on concrete.
Polyurea Crack Repair fills expansion joints or cracks to a maximum depth of 15mm.
BACK TO TOP
