Home Store About Us Contact

Rusted Solutions™ Rust Remover Gel

Brushable rust removal gel for vertical, fixed and difficult-to-immerse metal surfaces. Removes rust back to clean bare metal without aggressive mechanical preparation.

Information

Rusted Solutions™ Rust Remover Gel is a ready-to-use, brushable rust remover designed for metal surfaces that cannot be conveniently submerged in a rust removal solution.

Its gel consistency allows the product to cling to vertical, fixed and irregular surfaces, providing extended contact with rusted areas while helping limit application to the area being treated.

Rust Remover Gel is particularly suited to equipment, machinery, automotive components, fabricated steel, tools and restoration projects where immersion or aggressive mechanical rust removal is impractical.

Simply apply the Gel to the prepared rusted surface, allow it time to work and rinse thoroughly with water. Heavily corroded surfaces may require a second application.

The product is non-hazardous, biodegradable, VOC-free and non-corrosive, providing a practical alternative to aggressive rust removal methods.

Advantages

  • Brushable gel formulation
  • Clings to vertical and irregular surfaces
  • Suitable where immersion is impractical
  • Removes rust back to clean bare metal
  • Non-hazardous
  • Biodegradable
  • VOC-free
  • Non-corrosive
  • Easy water clean-up
  • Suitable for difficult-to-access areas
  • Will not damage chrome, paint, rubber, plastic, gel coat or timber when used as directed

Certifications

Australian Made

Industries

Truck, Bus & RV, Automotive & Marine, Craft & Hobby, Rust Removal


Product Application

Remove dirt, oil, grease and loose rust or scale from the surface before application.

Do not apply in direct sunlight. Apply a thick, even coat of Rusted Solutions™ Rust Remover Gel directly to the rusted area using a suitable brush.

Allow the Gel to remain on the surface for approximately 1–2 hours, or until the rust appears to have been removed.

Rinse the treated surface thoroughly with clean water. Heavily corroded areas may require a second application.

Do not allow the Gel to dry completely on the surface. If drying occurs, use water and a soft brush to assist with removal.

After treatment, dry the cleaned metal and apply an appropriate protective coating where required to minimise the return of corrosion.

Surfaces

Suitable for rust removal from ferrous metal surfaces, including:

  • Steel
  • Mild steel
  • Cast iron
  • Tools
  • Machinery and equipment
  • Automotive components
  • Fabricated metal components
  • Fixed and vertical steel surfaces

The Gel is particularly useful where the component cannot be submerged or where rust removal needs to be restricted to a specific area.


Specifications

Pack Sizes

500g, 1kg, 5kg


Downloads

Safety Datasheets

Rusted Solutions Gel Safety Data Sheet