ArmaLac® Clear Metal Lacquer
Australian-made clear protective metal lacquer for brass, copper, bronze and polished metal surfaces. ArmaLac® helps protect decorative metals from tarnishing, oxidation and corrosion while maintaining their natural polished appearance.
Information
ArmaLac® is a clear, fast-drying acrylic metal lacquer manufactured in Australia by Fortis Adhesives & Coatings.
Designed for the protection of polished and decorative metals, ArmaLac® forms a clear protective barrier that helps reduce tarnishing, oxidation, discolouration and corrosion caused by exposure to the surrounding environment.
ArmaLac™ contains a tarnish inhibitor and is formulated to provide adhesion to properly prepared polished metal surfaces. Its UV and weathering resistance makes it suitable for both interior and exterior applications.
The clear finish allows the appearance of brass, copper, bronze and other decorative metals to remain visible while reducing the need for repeated polishing.
ArmaLac® is suitable for architectural metalwork, door furniture, light fittings, handrails, decorative panels, signage, shopfitting, plaques, artworks, restoration projects and other suitable polished metal applications.
ArmaLac® can be applied by spray, brush, roller or dipping, depending on the product format and application requirements.
Material
Acrylic Lacquer
Advantages
- Helps protect metal from tarnishing and oxidation
- Contains a tarnish inhibitor
- Excellent adhesion to properly prepared polished metal
- Clear finish maintains the appearance of decorative metals
- UV and weathering resistant
- Suitable for interior and exterior applications
- Fast drying
- Suitable for spray, brush, roller or dip application
- Suitable for architectural and decorative metalwork
- Reduces the need for repeated polishing
- Australian made by Fortis Adhesives & Coatings
Product Application
ArmaLac® is designed for protecting polished, decorative and architectural metal surfaces where the natural appearance of the metal is to be retained.
Typical applications include:
- Architectural metalwork
- Door furniture and hardware
- Brass and copper panels
- Handrails
- Light fittings
- Decorative screens
- Signage
- Shopfitting
- Plaques
- Artworks and sculptures
- Restoration projects
- Decorative metal components
Correct surface preparation is essential. Metal surfaces should be properly cleaned and prepared before application. Polishing compounds, oils, waxes, fingerprints and other contaminants should be removed as they may affect coating adhesion and appearance.
For application method, recommended film thickness, drying and recoating requirements, refer to the current ArmaLac® Technical Data Sheet.
Surfaces
Suitable for appropriately prepared:
- Brass
- Copper
- Bronze
- Aluminium
- Zinc
- Silver
- Steel
- Polished metal
- Decorative metal surfaces
Always confirm suitability for the specific substrate and service environment before application.
Specifications
| Specification | Value |
|---|---|
| Recommended coats | 1-2 coats |
| Recoat | 3 hours |
| Touch dry | 15–20 minutes |
| Coverage | Approximately 6 m²/L at 25 µm DFT |
| Finish | Gloss |
| Coating type | Clear acrylic lacquer |
Pack Sizes
400g Aerosol, 250ml, 1l
Available Colours
ArmaLac® Lacquer FAQs
Frequently Asked Questions
What is the best clear coating for brass and copper?
ArmaLac is a clear acrylic protective lacquer formulated to help reduce tarnishing and oxidation on brass, copper and bronze. It provides a transparent gloss finish while preserving the appearance of polished or decorative metal.
Can ArmaLac be used outdoors?
Yes. ArmaLac is designed for interior and exterior metal protection, including architectural metalwork and decorative fittings. Durability depends on surface preparation, exposure conditions and correct application. Periodic inspection and maintenance may be required.
Can ArmaLac be applied directly to polished metal?
Yes, provided the surface is clean, dry and free from polishing compounds, oils, waxes and contamination. Proper cleaning is essential for adhesion. Test a small area before coating valuable or previously treated metal surfaces.
How many coats of ArmaLac are recommended?
Typically 1–2 coats are recommended, depending on the application and exposure. The published TDS specifies approximately 3 hours between coats under stated conditions. Follow the current TDS for application and drying requirements.
Is ArmaLac an alternative to Incralac?
ArmaLac is an Australian-made clear acrylic lacquer for protecting decorative and architectural metals. It may be considered as an alternative to Incralac for suitable applications. Compare substrate compatibility, preparation and application requirements before selecting a coating.