Concrete Shield™ Densifier is a ready to use, potassium and lithium silicate blend used to polish, harden, and seal green or aged concrete. The solution penetrates concrete to react and produce a dust-free surface with improved resistance.
Information | Applications | Specifications | Downloads
Concrete Shield™ Blended Densifier for Strong, Dust-Free Concrete
Concrete Shield™ Potassium/Lithium Silicate Blended Densifier works well on both indoor and outdoor concrete. It’s commonly used in places like warehouses, restaurants, stores, parking lots, and homes. It’s easy to apply and suits many types of surfaces.
This densifier makes concrete harder and more resistant to wear. It soaks deep into the surface to help create a long-lasting, polished finish. When applied, it reacts with the concrete to form a stronger surface and cut down on dust. This means floors stay cleaner and last longer.
It also helps reduce maintenance over time. Whether you’re working on a commercial building or a home garage, Concrete Shield™ gives dependable results.
If you need advice or help picking the right product, reach out to our technical team anytime.
Potassium and Lithium Silicate Blended Densifier
Potassium and Lithium Silicate Blended Densifier with penetration aid Good abrasion resistance Good penetration Suitable for interior and exterior Excellent cleanability Colourless and odourless Water-based For use when grinding and polishing concrete floors to provide a superior sheen
Application – Polished Surface Hardener
Apply Concrete Shield™ Densifier as an undiluted coat. Coverage is about 5–8 m² per litre, depending on how porous the surface is. To help absorption, scrub the product into the concrete with a stiff-bristle broom or floor scrubber for at least 30 minutes. Keep scrubbing until the surface feels slippery or the product thickens. Next, lightly mist the surface with water, then work the product in again for 10–20 minutes. Rinse the floor thoroughly afterward. Use a squeegee and wet vacuum to remove any excess product. Avoid letting the product pool or gather in spots, as this can cause problems.
For very porous or broom-finished surfaces, a second coat may be needed. Apply it 2–4 hours after the first coat dries.
Densifier in Grind/Polish Systems
Spray the densifier between grinding steps. For best results, apply it once during the first grinding and again during the last. Do not apply the densifier during polishing.
15L
Concrete Shield™ Densifier Technical Data Sheet
Concrete Shield™ Densifier Safety Data Sheet
Refer to Resources
