HydroFort® Polyurethane Primer
One component, solvent-free moisture curing rapid drying polyurethane surface membrane primer. Use on cement-based substrates that are not subject to rising damp, but have a residual humidity.
Information
HydroFort® Primer is a moisture curing polyurethane surface primer with low volatile organic compounds (VOC). It is used for waterproofing and to consolidate cementitious screeds, with no mixing and no waste. Best for cementitious screeds or ground concrete that are not subject to rising damp and with relative humidity below 75%.
Material
Polyurethane
Advantages
Fast cure
Short overcoat time with HydroFort® PU
Easily visible as Red in color
Touch dry in less than 50min
Easy application with roller
Product Application
Before application ensure that the cementitious screed or ground concrete is free of dust. Roll HydroFort® Primer at a rate of 5m²/L. Ensure no pooling of material. After 2 hours, confirm that the material is touch dry and sufficiently cured before application of HydroFort® PU liquid applied membrane.
RECOMMENDATIONS
Do not dilute with water or solvent.
Do not apply below +5°C.
Do not apply to heated screeds as a vapour membrane. It is suitable as consolidator only.
Do not allow to puddle on the surface of the substrate.
Surfaces
HydroFort® Primer is suitable for cementitious screeds, concrete, cement sheet and plasterboard.
Specifications
| Specification | Value |
|---|---|
| Application | Roller - 6-8mm Nap |
| Coverage | 5m²/L |
| Solvents | None |
| VOC | Low |
| Viscosity | <500cps |
| Color | Red |
Pack Sizes
10kg