Fortis AquaCoat™ is an ultra-low VOC, high solids, two-pack water-based epoxy floor coating designed for use on concrete floors in areas of pedestrian traffic, light to medium vehicle traffic, and where mild spillage is expected. Available in colours and clear - Refer to the Fortis Epoxy Colour Chart.
Description
Fortis AquaCoat™ has been designed to meet Green Building Council of Australia (GBCA) Green Star Industry Standards as well as Good Environmental Choice Australia standard (GECA 23-2012). Fortis AquaCoat™ is designed for the internal coating of concrete floors and walls. It comes in a range of colours and the clear coat can also be tinted with suitable water-based tinters. For architectural specifications please contact us direct.
Material
Water-based Epoxy
Advantages
Suitable as primer, topcoat and for flake floors Low odour, ultra-low VOC High solids Long pot life Easy to roll Water thinkable Excellent adhesion High build application Can be applied over damp concrete
IndustriesConstruction, Automotive & Marine, Concrete, Industrial & Mining
Applications
Fortis AquaCoat™ is an ultra-low VOC, high solids, two-pack water-based epoxy floor coating designed for use on concrete floors in areas of pedestrian traffic, light to medium vehicle traffic, and where mild spillage is expected. The very low odour present during application also makes it ideal for use in schools, healthcare facilities, food service areas, office buildings, or in any area where the odour is an issue. Fortis AquaCoat™ is recommended for internal use and is available in a range of colours.
Surfaces
Substrates should be thoroughly sanded or ground to provide a keyed surface. If applying over existing coatings adhesion should be tested by preparation of a small test area. Remove all potential contaminants. On new concrete surfaces, it is best to diamond grind the surface. Old surfaces are best diamond ground but it is possible to etch and clean the surface. Contact Fortis if unsure. Fortis AquaCoat™ Clear is recommended as a primer before application of a coloured coat. New concrete must be cured for a minimum of 28 days before application
4L and 16L kits
AquaCoat™ - Technical Data Sheet
AquaCoat™ Pt.A- Safety Data Sheet
AquaCoat™ Pt.B- Safety Data Sheet
Refer to Resources