Concrete Shield™ Premium Lithium Densifier is a high performance Nano Lithium Silicate solution with penetration additives for premium polished concrete floor. The nano particle Concrete Shield™ Premium Lithium Densifier penetrates deeper, reacts faster saving time polishing.
Information | Applications | Specifications | Downloads
Concrete Shield™ Premium Lithium Densifier – Superior Concrete Protection
Concrete Shield™ Premium Lithium Densifier works quickly to give concrete a shiny finish. Unlike sodium silicate densifiers, it does not cause long-term salting. Therefore, your concrete stays cleaner and lasts longer. In addition, it offers strong abrasion resistance and deep penetration. As a result, cleaning the surface becomes easier.This densifier is suitable for both indoor and outdoor use. For example, it is often applied in warehouses, restaurants, retail shops, and homes. Because of its effectiveness, Concrete Shield™ Premium Lithium Densifier is a smart choice to protect and improve many types of concrete surfaces.
Nano-particle Lithium Densifier with Penetrating Additives
Water-based Good abrasion resistance Excellent penetration Suitable for interior and exterior Excellent cleanability Colourless and odourless For use when grinding and polishing concrete floors to provide a superior sheen
Application Instructions for Concrete Shield™ Premium Lithium Densifier
Polished Surface Hardener
Apply one uniform, undiluted coat at 5-8 m²/L, depending on substrate porosity. To maximize penetration, scrub the material into the surface with a stiff bristle broom or industrial floor-scrubbing machine for at least 30 minutes, until the product gels or the surface feels slippery. Next, lightly mist with water and work it in for another 10-20 minutes. Rinse the floor and remove excess material using a squeegee and wet vacuum. Avoid letting the product pond. On porous, rough-textured, or broom-finished surfaces, a second coat may be needed 2-4 hours after the first. Floors can be returned to service 4-6 hours after excess removal.
Densifier in Grind / Polish System
Apply by spray or squeegee between grinding stages. For best results, apply twice: once early and once late in the grinding process. Note: Do not apply during the polishing stage.
Sealer Application
Spray the sealer evenly at the recommended rate. For best results, apply 7 to 14 days after concrete placement to allow proper curing. Avoid applying on concrete less than 3 days old, as excess moisture may block full densifier penetration. Therefore, waiting ensures better absorption and longer-lasting protection.
Not suitable for use on natural stone. Do not apply over areas previously treated with concrete curing compounds or membrane forming sealers, unless these have been completely removed. Concrete Shield™ Premium Lithium cannot be expected to make bad or disintegrating concrete into good concrete. This product will not work effectively on lightweight, extremely porous, or worn concrete.
15L
Concrete Shield™ Premium Technical Data Sheet
Concrete Shield™ Premium Safety Data Sheet
Refer to Resources
