HomeAbout UsDistributorsContact
  • Home
  • About Us
  • Distributors
  • Contact

Graffiti Shield™ Anti Graffiti Coating

High protective Anti Graffiti clear coating

Description

Graffiti Shield™ is a water-based non-yellowing Polyurethane high protection two-component coating. It is used as a protective clear coat to improve self-cleaning and provide high chemical resistance that prevents most enamels that are commonly used to vandalize public spaces. This is considered a non sacraficial anti graffiti.

Material

2 Part Waterbased Polyurethane

Advantages

• Superior bonding
• Non-yellowing
• High chemical resistance
• Ready to use
• Environmentally friendly
• Low-VOC
• Improved cleanability

 

Industries

Construction, Concrete Repair

Applications

Mix Fortis Graffiti Shield Part A and B thoroughly before use. Stir for a minimum of 4 minutes using a jiffy mixer. Avoid rapid mechanical stirring as this will propagate air bubbles into the coating. Can be applied via brush, roller or airless spray.

Surfaces

Prior to application ensure that the substrate is clean, dry, and free of wax, oil, dirt, grease, curing compounds, and loose, flaking material. Ensure surface is between 10°C and 35°C. Ensure that area is well ventilated during application and until the coating has cured. New concrete must be cured for a minimum of 28 days prior to application. For the best result filling in of rough surfaces is done prior to applying the Graffiti Shield to make removal of graffiti easier, as rough surfaces give voids that make it difficult to clean.

Feature
Specification
VOC Content
<10 g/L
Sheen
Gloss
Mix ratio
3 parts A :1 part B (vol.)
Color
Clear
Theoretical Coverage
7-10m2/L
Number Of Coats
2
Recoat
30-40 minutes (no longer as will no longer bond)
Final cure
7 Days
Application temperature
5 to +35ºC
Pack Sizes

4L
16L