FORTIS AD215. Brush Contact Adhesive that is heat resistant. A HIGH QUALITY contact adhesive with excellent brushing consistency.
FORTIS AD215 is a quick-drying universal contact adhesive applied using a brush or roller. FORTIS AD215 has excellent heat resistance, long open time, and exhibits superior bonding to a wide range of materials. Ideal for bonding laminates | wood | plastic | leather | rubber | metal | concrete | flexible foams | vinyl | EVA | Comicon Costume making | Urethane foam | Upholstery | Shop Fitting | Carpets | Cork | Linoleum.Material
- Fast touch dry time
- One component, no mixing required
- High temperature and water resistant
- High performance, flexible and strong adhesion
- May be applied by brush or scrape
Apply evenly to both surfaces that are to be bonded. Allow adhesive to evaporate until it is no longer wet to touch (5-10 minutes). Join surfaces together before the end of the adhesive open time (~20 minutes). Apply as much pressure as possible to achieve the optimum bond strength. The adhesive can be heat activated once all solvent has evaporated. Fortis recommend that applicators carry out their own adhesion test on their particular substrate prior to application.
LIMITATIONS Coverage rate, open time, and press time are largely dependnent on the type of material to be bonded, as well as the ambient conditions. Do not use below 10°C as condensed water may form on the ashesive film and prevent bonding.Surfaces
Ensure bonded surface is clean and free from dust, oil, and other foreign materials. Metal surfaces should be degreased with Fortis Contact Cleaner. Plastic surfaces should be abraded with 60-80 grit paper prior to bonding.