HomeAbout UsDistributorsContact
  • Home
  • About Us
  • Distributors
  • Contact

Fortis AD5405

Excellent polyurethane for a multitude of bonding substrates, from timber, veneers, FRP, Fibreglass and Composite Laminating Adhesive

Description

Excellent open time and enhanced penetration for laminating composites such as FRP to timber. Usable through a large range of adhesive applicators.

Material

Polyurethane

Advantages

  • 100% Solids - Suitable for many assembly applications
  • Zero VOC / Solvent and formaldehyde free
  • 60min Working time
  • 180min clamp time @25C
  • Glues almost anything
  • Paintable / Stainable
  • Sandable
  • Expands as it dries
  • Water resistant
  • Superior adhesion
  • Excellent heat resistance

Industries

Construction, Truck, Bus & RV, Automotive & Marine, Furniture & Woodworking, Craft & Hobby, Shop Fit Out

Applications

Fortis AD5405 requires atmospheric moisture to cure. Ensure some moisture is available in substrate, typically upto 12% moisture content in timbers and 8% in cement fibre. If substrates are drier it is recommend to lightly mist or wipe the surface with water. One surface should be porous. This is a non-structural adhesive. For structural applications please contact Fortis adhesives & Coatings.

Surfaces

Ensure bonded surface is clean and dust free. To achieve optimum bonding results, please ensure a tight-fitting joint, less than 0.3mm is recommended. Excellent substrate-to-substrate contact is necessary to achieve optimum bond strength. A light water mist may be applied to substrate if no moisture is present to allow cure. Normal clamping time is 180-240 minutes.

LIMITATIONS Will not adhere polyethylene or polypropylene plastic

Feature
Specification
Color
Amber
Viscosity
>4500cps@20oC
Coverage
100-200 g/m2
Working Time
10min
Clamp Time
40 min@20oC (65% RH)
Shear Strength Dry (Timber- Vic Ash)
>12MPA (95% WF)
Shear Strength Wet (Timber- Vic Ash)
>11MPA (75% WF)
Service Temp
-40oC to 90oC (test suitability prior)
Pack Sizes

550g
5kg
18kg
220kg