Fortis AD5205 D4 PU adhesive is a universal, solvent-free, one-component, water-resistant, wood adhesive for all kinds of exterior applications. It is a medium-drying with small amount of foaming.
Medium curing speed with high strength adhesive. Typically requires 60 minute clamp time. Suitable for many laminating and bonding requirementsMaterial
- 100% Solids - Suitable for many assembly applications
- Zero VOC / Solvent and formaldehyde free
- 20min Working time
- 60min clamp time @25C
- Glues almost anything
- Paintable / Stainable
- Expands as it dries
- Water resistant
- Superior adhesion
- Excellent heat resistance
Fortis AD5205 requires atmospheric moisture to cure. Ensure some moisture is available in substrate, typically upto 12% moisture content in timbers and 8% in cement fibre. If substrates are drier it is recommend to lightly mist or wipe the surface with water. One surface should be porous. This is a non-structural adhesive. For structural applications please contact Fortis adhesives & Coatings.Surfaces
Ensure bonded surface is clean and dust free. To achieve optimum bonding results, please ensure a tight-fitting joint, less than 0.3mm is recommended. Excellent substrate-to-substrate contact is necessary to achieve optimum bond strength. A light water mist may be applied to substrate if no moisture is present to allow cure. Normal clamping time is 60-80 minutes.
LIMITATIONS Will not adhere polyethylene or polypropylene plastic