A fast curing polyurethane specific for bonding smooth edge carpet gripper to timber or concrete.
Good adhesion to timber and concrete Suitable for green concrete 100% solids Solvent and formaldehyde freeMaterial
- Rapid set
- Added adhesion promoters to bond to concrete
- Excellent resistance to water and heat
- Bonding smooth edge carpet
Apply a thin bead of adhesive to one surface. Press the two surfaces to be bonded firmly together. Pressure is required to keep the two surfaces in contact while adhesive cures. Large extrusions should also be fixed with appropriate fixing screws.
Fortis CARPET GRIP is a moisture curing system. 1 hour curing time is recommended, however this can be accelerated by spraying a light mist of water to one surface. If applied in a thick bead, the product will foam more, take longer to cure, and achieve a weaker bond.
The rapid setting nature of this product allows for stretching of carpet approximately 1 hour after gripper placement.Surfaces
Ensure bonded surface is clean and dust free, and free of any other contaminants