HomeAbout UsDistributorsContact
  • Home
  • About Us
  • Distributors
  • Contact

Fortis AD5025-S

FORTIS AD5025-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 2 minute open time for fingerjoining. It is used for fast processing of fingerjoinging timber.

Description

FORTIS AD5025-S Structural Wood Adhesive is a single-component, water-resistant, wood adhesive for structural lamination. Extremely fast curing with a slightly foaming effect. FORTIS AD5025-S Structural Wood Adhesive is suitable for extremely fast machine fingerjoining for example: decking, bracing, beams, lintels

Material

Polyurethane

Advantages

  • Suitable for high density timbers / Most hardwoods
  • Waterproof adhesive according to NEN-EN 204 D4
  • EN302 /AS/NZS 4364:2010
  • Specially developed for heavily loaded construction joints
  • Expands as it dries
  • Superior adhesion at low dosage
  • Excellent heat resistance

Certifications

EN302 /AS/NZS 4364:2010 - Pass GLTAA - Glued Laminated Timber Association of Australia: CERTIFICATE #007.

Industries

Construction, Industrial & Mining

Applications

FORTIS AD5025-S is suitable for all kinds of finger joints most common though are comb style joints. FORTIS AD5025-S is suitable for gluing a wide range of woods. It is suitable to many Australian and Indonesian hardwoods with high densities to more typically softwoods. Both sides of the surface must be dry and free of dust and grease. Assembly time tolerances will be mill and substrate specific. However, a good rule of thumb for minimum assembly time tolerances with the recommended water misting is 2 minutes total assembly time. In cold climates it is recommended the Adhesive is kept warm 20-30C. (Fortis can assist for simple setup of heat rooms). FORTIS AD5025-S generally requires lower dosages than traditional resins used for engineered wood products.

Surfaces

Excellent wood-to-wood contact is necessary to achieve optimum bond strength. A good mechanical fit for finger-jointing is necessary and internal or bonding pressures for laminating must be at least 1400kPa for optimum performance. Extensive laboratory experiments have shown that to achieve optimum performance with the FORTIS AD5025-S a water mist can be applied to the wood.

Feature
Specification
EN302 /AS/NZS 4364:2010
Pass
GLTAA Certificate
#007
Working Time
<2min
Clamp Time
45-60min@20oC (65% RH)
Coverage
55-110 g/m2
Pack Sizes

225kg
1100kg