Products: ConcreteShield™ AcrylaSeal, AcrylaSolv™ Solvent-Based, Concrete Shield™ Wet Look.
Protect and enhance concrete with a sealer suited to the surface, finish and application.
Choose AcrylaSeal for a low-odour water-based acrylic film, AcrylaSolv when a solvent-based acrylic system is preferred, or Wet Look when you want penetrating colour enhancement without the same type of topical acrylic film.
AcrylaSeal and AcrylaSolv may be suitable for properly prepared concrete driveways. The correct choice depends on the substrate, previous coatings, moisture and desired finish. Test before application and follow the relevant technical data sheet.
Yes. Concrete must be clean, dry and free from oil, grease, dust, curing compounds and incompatible coatings. Existing sealers may need to be identified and removed or tested for compatibility.
Film-forming sealers can reduce surface texture, particularly when wet. Where slip resistance is required, assess the complete system and consider a compatible non-slip additive.
Coat requirements vary by product, surface porosity and application conditions. Follow the relevant product technical data sheet rather than applying one rule to every sealer.
Choose AcrylaSeal for a low-odour water-based acrylic film, AcrylaSolv when a solvent-based acrylic system is preferred, or Wet Look when you want penetrating colour enhancement without the same type of topical acrylic film.
AcrylaSeal and AcrylaSolv may be suitable for properly prepared concrete driveways. The correct choice depends on the substrate, previous coatings, moisture and desired finish. Test before application and follow the relevant technical data sheet.
Yes. Concrete must be clean, dry and free from oil, grease, dust, curing compounds and incompatible coatings. Existing sealers may need to be identified and removed or tested for compatibility.
Film-forming sealers can reduce surface texture, particularly when wet. Where slip resistance is required, assess the complete system and consider a compatible non-slip additive.
Coat requirements vary by product, surface porosity and application conditions. Follow the relevant product technical data sheet rather than applying one rule to every sealer.
