Compare the Options
| Treatment | Result | Fortis options |
|---|---|---|
| Natural-look enhancer | Penetrating protection with subtle colour enhancement | Natural Look Enhancer |
| Wet-look enhancer | Penetrating protection with deeper, richer colour | Wet Look Enhancer |
| Acrylic sealer | Clear surface film for concrete, paving and driveways | AcrylaSeal or AcrylaSolv |
| Polyurethane coating | Hard-wearing clear film for concrete floors | Coat 519 or Coat 526 |
Choosing an Enhancer
Choose Natural Look Enhancer when polished concrete should retain a natural appearance while gaining resistance to water, oil and grease. Choose Wet Look Enhancer where stronger colour enhancement is preferred. Both require a clean, dry and absorbent surface.
Choosing a Film-Forming System
Water-based AcrylaSeal provides a clear acrylic finish with lower odour. Solvent-based AcrylaSolv produces stronger colour enhancement. For floors requiring greater abrasion and wear resistance, consider clear polyurethane Coat 519 or self-priming water-based Coat 526.
Densifier Is Not a Sealer
Potassium/Lithium Densifier and Premium Lithium Densifier harden concrete during polishing but do not replace the final protective treatment.
Test the Complete System
Confirm absorption, colour, sheen and slip resistance on a representative area. Dense, polished or previously sealed concrete may reject penetrating products, while film-forming systems require suitable preparation and adhesion.
Technical Disclaimer & Engineering Notice:
The technical information and application guidance provided above are general in nature. Actual performance depends on substrate condition, surface preparation, joint design, application method and service environment. Always refer to the current Technical Data Sheet (TDS) and Safety Data Sheet (SDS), and confirm suitability for the intended application before specification or production use.