Products: Rust Remover Gel, Rust Remover Soak, Rust Remover Concentrate, Easy Clean.
Australian-made rust removal solutions for fixed surfaces, tools, parts and workshop applications.
Rusted Solutions™ products remove rust from steel and other ferrous metals without aggressive grinding or blasting. Select the format that best suits the size, shape and location of the item.
Rust Remover Gel clings to vertical, fixed and irregular metal surfaces that cannot be immersed. For longer contact time, cover the applied gel with plastic film and check the surface periodically.
Rust Remover Soak is ready to use for tools, parts and components that can be completely submerged in a rust-removal bath.
Rust Remover Concentrate is diluted with water to prepare larger bath volumes, making it suited to workshops, maintenance operations and repeated immersion work.
Easy Clean Stainless Steel removes light rust staining, tea staining and surface contamination from suitable stainless steel. It is a stainless steel cleaning and restoration product rather than a general rust remover for ordinary steel.
Rinse or neutralise as directed by the product instructions, dry the metal thoroughly and apply an appropriate protective finish promptly. Freshly cleaned ferrous metal can develop flash rust if left unprotected.
Compare the products in Rust Remover Gel vs Soak vs Concentrate. For suitable decorative metals requiring a clear protective finish, see ArmaLac™ Clear Metal Lacquer.
Choose Gel for fixed, vertical or difficult-to-immerse surfaces. Choose Soak for parts that can be submerged in a ready-to-use bath. Choose Concentrate when you need to prepare larger volumes of soaking solution.
Use Easy Clean Stainless Steel for suitable stainless steel affected by light rust staining, tea staining or surface contamination. Always test first and follow the product instructions.
Required contact time depends on the product, rust severity, temperature and surface condition. Inspect the metal periodically and follow the relevant product instructions rather than allowing the product to dry.
After applying Gel, cover it with plastic film to reduce evaporation and extend contact time. Check progress periodically and do not allow the product to dry on the surface.
Clean ferrous metal can develop flash rust quickly. After treatment, rinse or neutralise as directed, dry thoroughly and apply a suitable protective coating as soon as practical.
