FORTIS COAT 526 is a high performance water based clear polyurethane that provides a natural look to concrete and timber substrates. Available in Gloss / Satin / Matt
Simple application by brush, roller or spray. This water based polyurethane ensures easy no fuss application with little odour. Best used over Fortis Prime 520.
For use on
- Concrete flooring
- Timber flooring
- Concrete benchtops, walls, stairs
- Low odour
- Ultra low VOC
- Medium solids
- UV stable
- Excellent wear resistance
- Excellent abrasion resistance
- Excellent recoatability
Fortis Coat 526 Gloss can be applied by brush or roller. Mixed material should be poured out in ribbons across the area to be rolled. A 270mm microfibre 5mm NAP roller cover is recommended. Fortis Coat 526 Gloss should be applied over Fortis ECO Prime 520 to achieve the desired build. For a gloss finish, build coats and final coats should be Fortis ECO Coat 526 Gloss. For a satin finish, build coats should be Fortis Coat 526 Gloss, and final coat should be Fortis Coat 526 Satin.Surfaces
Substrates should be thoroughly sanded or ground to provide a keyed surface. If applying over existing coatings adhesion should be tested. Remove all potential contaminants.
Over New Concrete
On new concrete surfaces it is best to diamond gind the surface. Fresh concrete should be left to cure fo a minimum of 28 days prior to application.
Old surfaces are best diamond ground but it is possible to etch and clean the surface. Conctact Fortis if unsure. On surfaces with large amounts of quatz it is recommended pre-prime the surface with Fortis Polyurethane Adhesion Promoter.