Concrete Shield™ Natural Look Enhancer is ready to use penetrating water and oil repellent based on blended polymers in a non-flammable solvent. It penetrates deeply and reduces capillary absorbency of water, oils and greases. Typically used on concrete, ceramics, terracotta, all-natural and artificial stones and terrazzo style materials.
Concrete Shield™ Natural Look Enhancer is a heavy-duty penetrating sealer protection system against most stains. The non-flammable, solvent-based system is suitable for interior and exterior use. It is used in warehouses, restaurants, retail shops and car parks. In addition to protecting the surface Concrete Shield™, Natural Look Enhancer lightly darkens the stones natural colours producing a visible lustre. It greatly reduces the absorbency of Concrete | Stone | Terrazzo | Slate | Granite | limestone
Maximum protection Leaves polished concrete with natural look Enhances stone colour Keeps polished concrete cleaner longer Non-Flammable Excellent coverage Does not discolour the polished concreteIndustries
Always test this product in an inconspicuous area before application. The surface to be treated must be completely dry, clean and free of stains. Apply evenly with a microfibre mop or lamb wool applicator (Approximately 40 square meters per litre). The surface should have a uniform shine and wetness. Repeat this procedure with a second application within 20 minutes. After a further 20 minutes lightly wipe off excess product residues with a cloth slightly damp with Concrete Shield™ Natural Look Enhancer to remove puddles, drips etc. Remove residue once the surface is touch dry, with a medium stripper/buffing pad. The excessive application will make it difficult to remove
Ensure all surfaces are clean of oils and dust before application. NOTES: Some stones absorb unevenly which may result in a cloudy/patchy appearance. Glass, polishes, plastics, varnish and other surfaces sensitive to solvents must be protected against splashes. Non-absorbent and wet surfaces can not be impregnated. Marble and limestone remain sensitive to acid. Drying time: Most of the solvents evaporate within two hours. Floors can be walked on after 12 hours. The impregnator is fully effective after 48 hours. Application temperature: The temperature of the surface to be treated should be between 10°C and 25°C. Turn down underfloor heating. Avoid direct sunlight. Coverage: the coverage depends on the absorbency of the surface.