Your search for "ultra-clear-epoxy-resin-ad822" was found in 10 product lines, 37 products, 3 resources, 8 industries, and 3 pages.
If you can't find what you're looking for, try a Google-powered search, or contact us.
Fortis AD822 Epoxy Adhesive. Two-Part high Strength Solvent Free Epoxy Adhesive that is easy to mix and apply.
Epoxy resin system for filling knots, holes, cracks and other imperfections in rough sawn, dressed or recycled timber.
Fortis 822 Ultra Clear is casting resin for crystal clear, high gloss casting applications.
Fortis UltraCrete™ 3KPU is our urethane-based system is a heavy-duty seamless resurfacer that provides exceptional durability and service.
Made of 304 polished stainless steel, Jiffy mixers are perfect for mixing epoxies, polyurethanes & polyaspartic.
FORTIS COAT 824 SL is a self-levelling solvent-free two-pack epoxy floor coating designed for build coats from 5mm to 40 mm. FORTIS COAT 824 SL is available in clear for metallic flooring and in...
FORTIS AD5205-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 20 minute open time. It is used for fast processing glue laminated timber.
A fast cure solvent-based epoxy primer for concrete substrates before application of topcoats including flake floor. Available in Clear and Light Grey
FORTIS PRIME 520 water based polyurethane.
FORTIS GLUE RELEASE is a temporary water-based wax emulsion coating that allows surfaces to repel glue, adhesives and resins. It coats and protects equipment from dried glue mess and reduces...
FORTIS AD5045-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 4-minute open time for finger jointing. It is used for fast processing of finger-jointin...
A high solid clear epoxy primer that reinstates and primes poor concrete surfaces before application the application of topcoats.
FORTIS AD5025-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 2-minute open time for finger jointing. It is used for fast processing of finger...
Xylene based Thinner for Epoxy Floor coatings
Fortis AquaCoat™ is an ultra-low VOC, high solids, two-pack water-based epoxy floor coating designed for use on concrete floors in areas of pedestrian traffic, light to medium vehicle traffic, and...
FORTIS COAT 823 HS is a high solid, high build, two-pack epoxy floor coating designed for applications demanding high structural integrity. FORTIS COAT 823 HS is available in colour and clear. Refer...
HydroFort™ VB (Vapour Barrier) is a low VOC water-based epoxy vapour barrier.
Fortis Non-Slip Additive embeds into the coating to provide a textured finish which reduces the slip hazard associated with coated floor surfaces. Compatible with many coatings, including all Fortis...
HydroFort™ PU is a highly elastic, class 3, single component, liquid applied, polyurethane waterproofing membrane system that complies with AS/NZS 4858. HydroFort™ PU forms a tough, durable membrane...
600 ml (1:1 & 2:1) 26:1 High Thrust Dual Component Cartridge Gun
Fortis Coat 527 is a two-part non-yellowing polyurethane coating with good chemical resistance and exterior durability.
FORTIS COAT 526 is a high-performance water-based clear polyurethane that provides a natural look to concrete and timber substrates. Available in Gloss and Satin.
FORTIS COAT 519 – A premium non-yellowing clear single pack polyurethane floor coating. Specifically designed for use on concrete and timber to provide a long-lasting protective coating that does not...
FORTIS AD211-PS is a high tack solvent-based contact adhesive. FORTIS AD211-PS offers high initial grab and has been formulated for use in the bonding of polystyrene and other lightweight insulation...
Concrete Shield™ AcrylaPave is a fast-drying acrylic paving sealer. It provides a protective gloss layer which provides resistance to oil, grease, dust and dirt.
Concrete Shield™ AcrylaSeal Concrete Sealer is a fast-drying water-based acrylic concrete sealer. Recommended for use on concrete driveways and for sealing factory floors. Suitable for untreated...
High protective Anti Graffiti clear coating
Concrete Shield™ AcrylaPolish is a premium grade fast-drying water-based acrylic polyurethane sealer/polish. It provides a highly durable and protective gloss ‘wet-look’ layer leaving the concrete...
A Water-Based Non-Toxic melamine glue bonding melamine faced board in the manufacture of cabinets and drawers. Dries Clear.
FORTIS AD225 is a premium grade cross-linkable contact adhesive. FORTIS AD225 is fast drying, and provides excellent adhesion to difficult to bond substrates, including but not limited to: plastics,...
A single component adhesion promoter.
FORTIS AD213 will bond a wide variety of substrates, including wood, metals, rubber, fabric, most plastics, cardboard, polythene and concrete.
FORTIS AD215. Brush Contact Adhesive that is heat resistant. A HIGH-QUALITY contact adhesive with excellent brushing consistency.
UltraSpart™ 100 is a two-component, low VOC, aliphatic polyaspartic coating designed as a UV stable topcoat for polyurea and polyurethane systems, or as a standalone rapid return to service system...
Concrete Shield™ Grout 1000 is a high-performance grout for use with polished concrete and terrazzo floors.
Unprotected Concrete such as driveways, pavers, and floors can be easily damaged, with the most common causes including water damage and unwanted staining, as well as general wear and tear. Once the …
Choosing the correct adhesive for woodworking — especially door, window, and stair construction — is essential to ensure longevity, easy-of-use, and the overall aesthetics of the project. There are a huge variety …
Concrete Surfaces often suffer from wear and tear, heavy traffic, abrasion, and impact, leading to deterioration over time. In environments like garages, industrial floors, warehouses, and even domestic spaces like carparks and …
De-lamination of coatings can occur between the coating system and the substrate. Causes of de-lamination The possible causes for de-lamination are: Contamination Inadequate surface preparation Incompatibility 1. Contamination Contamination can be on …
Wash the area thoroughly. Leave it wet. Wrap 1000-grit paper around a rubber sanding pad. Both the paper and sanding pad can be purchased at a good automotive parts store. Dip the …
Applying Acid Stains Prepare concrete ready for application of clear coating. As per Technical note#4. The concrete needs to contain sufficient Calcium for the stain to react. If the concrete has been …
When a superior bond strength is required Fortis recommend the use of Epoxy systems.
Epoxy and Polyurethane Thinners slow the cure of coatings and reduce the viscosity.
Performance polyurethane high build mortars that are chemical and thermal shock resistant..
A complete range of industrial epoxy floor coating systems for factories, carparks and garages.
Polyurethanes are the preferred choice for seamless waterproofing membranes.
Fast lamination and bonding can only be achieved with Contact Adhesives.
Extremely durable and hard wearing, suitable for concrete garages and workshops floors.
BACK TO TOP
