FORTIS AD5505-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 50-minute open time. It is used where slower layup of the glue lamination is required. It reacts with moisture within the timber to provide a superior bond for load-bearing timber applications.
Information | Applications | Specifications | Downloads
FORTIS AD5505-S Structural Wood Adhesive is a one-component, water-resistant, wood adhesive for structural lamination. FORTIS AD5505-S Structural Wood Adhesive is suitable for large structural glue lamination that requires a longer time to lay up before clamping, for example structural beams, lintels
Polyurethane
Suitable for high-density timbers / Most hardwoods Waterproof adhesive according to NEN-EN 204 D4 EN302 /AS/NZS 4364:2010 Specially developed for heavily loaded construction joints Expands as it dries Superior adhesion at low dosage Excellent heat resistance
EN302 /AS/NZS 4364:2010 - Pass GLTAA - Glued Laminated Timber Association of Australia: CERTIFICATE #007.
FORTIS AD5505-S is suitable for all kinds of glue lamination, most commonly structural timber. It is also suited to door, window, post and stair manufacturing. FORTIS AD5505-S is suitable for glueing a wide range of woods. Examples include hard, soft and exotic wood types. It is suitable for many Australian and Indonesian hardwoods with high densities Both sides of the surface must be dry and free of dust and grease. Timber moisture content is recommended to be between 8-14%
Excellent wood-to-wood contact is necessary to achieve optimum bond strength. Ensure appropriate clamp pressure is used
18kg, 225kg, 1100kg
Fortis AD5505-S Technical Data Sheet
Fortis AD5505-S Safety Data Sheet AUS GHS
Fortis AD5505-S Safety Data Sheet NZ
