Concrete Shield™ Natural Look Enhancer is ready to use penetrating water and oil repellent based on blended polymers in a non-flammable solvent. It penetrates deeply and reduces capillary absorbency of water, oils and greases. Typically used on concrete, ceramics, terracotta, all-natural and artificial stones and terrazzo style materials.
Information | Applications | Specifications | Downloads
Concrete Shield™ Natural Look Enhancer is a strong penetrating sealer that protects floors from most stains. Because it is safe to use both indoors and outdoors, it works well in many places. For example, it is great for warehouses, restaurants, shops, and parking lots. Also, it is non-flammable, so it won’t catch fire easily. In addition to protection, this product improves the look of floors. It deepens the natural colours of the stone and adds a soft, attractive shine. Moreover, it helps stop water and stains from soaking into the surface.
Overall, Concrete Shield™ can be used on many surfaces. These include Concrete, Stone, Terrazzo, Slate, Granite, and Limestone.
Fluorinated polymers
Maximum protection Leaves polished concrete with natural look Enhances stone colour Keeps polished concrete cleaner longer Non-Flammable Excellent coverage Does not discolour the polished concrete
Always test this product on a small, hidden area before applying it to the whole surface. Make sure the surface is completely dry, clean, and free of stains before you begin. Apply the product evenly using a microfiber mop, roller, or brush. The coverage will vary between 4 and 40 m² per litre, depending on how porous the surface is.
The surface should look evenly wet and shiny after application. Repeat the same process with a second coat within 20 minutes. After waiting another 20 minutes, gently wipe away any excess product using a cloth lightly dampened with Concrete Shield™ Natural Look Enhancer. This helps remove puddles, drips, and other residue.
Once the surface feels dry to the touch, remove any leftover residue with a medium stripper or buffing pad. Be careful not to apply too much product, as it can be hard to remove later.
Before applying, make sure all surfaces are clean and free of oils and dust. Keep in mind that some stones may soak up the product unevenly, which can cause a cloudy or patchy look. Also, protect glass, polished surfaces, plastics, varnishes, and other sensitive materials from splashes.
Non-absorbent or wet surfaces cannot absorb the product, so they should be dry before treatment. Marble and limestone are still sensitive to acids, so take care when working with these stones.
Most solvents dry within two hours, but floors can only be walked on after 12 hours. The product reaches full strength after 48 hours.
For best results, the surface should be between 10°C and 25°C. Turn off underfloor heating and avoid applying the product in direct sunlight.
Coverage will depend on how much the surface soaks up the product, so plan accordingly.
5l
Concrete Shield™ Natural Look Technical Data Sheet
Concrete Shield™ Natural Look Safety Data Sheet
Refer to Resources
