Your search for "coatings epoxy self-leveling" was found in 14 product lines, 40 products, 2 distributors, 6 resources, 8 industries, and 4 pages.
If you can't find what you're looking for, try a Google-powered search, or contact us.
Fortis UltraCrete™ 3KPU, a urethane-based system, is a heavy-duty seamless re-surfacer that provides exceptional durability and service.
Fortis AquaCoat™ is an ultra-low VOC, high solids, two-pack water-based epoxy floor coating designed for use on concrete floors in areas of pedestrian traffic, light to medium vehicle traffic, and...
A high solid clear epoxy primer that reinstates and primes poor concrete surfaces before application the application of topcoats.
A fast cure solvent-based epoxy primer for concrete substrates before application of topcoats including flake floor. Available in Clear and Light Grey
FORTIS COAT 823 HS is a high solid, high build, two-pack epoxy floor coating designed for applications demanding high structural integrity. FORTIS COAT 823 HS is available in colour and clear. Refer...
High protective Anti Graffiti clear coating
HydroFort™ VB (Vapour Barrier) is a low VOC water-based epoxy vapour barrier.
FORTIS AD525 is a self-levelling, 100% solids two-component, rapid curing polyurea elastomer control joint filler. Designed for concrete slabs and roadways It is flexible enough to handle 10-15%...
FORTIS AD213 will bond a wide variety of substrates, including wood, metals, rubber, fabric, most plastics, cardboard, polythene and concrete.
Fortis 822 Ultra Clear is casting resin for crystal clear, high gloss casting applications.
Epoxy resin system for filling knots, holes, cracks and other imperfections in rough sawn, dressed or recycled timber.
Fortis AD822 Epoxy Adhesive. Two-Part high Strength Solvent Free Epoxy Adhesive that is easy to mix and apply.
Xylene based Thinner for Epoxy Floor coatings
Fortis Non-Slip Additive embeds into the coating to provide a textured finish which reduces the slip hazard associated with coated floor surfaces. Compatible with many coatings, including all Fortis...
600 ml (1:1 & 2:1) 26:1 High Thrust Dual Component Cartridge Gun
HydroFort™ PU is a highly elastic, class 3, single component, liquid applied, polyurethane waterproofing membrane system that complies with AS/NZS 4858. HydroFort™ PU forms a tough, durable membrane...
Made of 304 polished stainless steel, Jiffy mixers are perfect for mixing epoxies, polyurethanes & polyaspartic.
Fortis Coat 527 is a two-part, non-yellowing polyurethane coating designed for superior chemical resistance and long-lasting durability. Perfect for a variety of surfaces, it offers exceptional...
Fortis Antique Blue Acid Stain is a concentrated penetrating reactive stain which chemically combines with cured concrete to produce permanent variegated colouring effects. Aged antique appearance is...
UltraSpart™ 100 is a two-component, low VOC, aliphatic polyaspartic coating designed as a UV stable topcoat for polyurea and polyurethane systems, or as a standalone rapid return to service system...
Fortis Antique Tan Acid Stain is a concentrated penetrating reactive stain which chemically combines with cured concrete to produce permanent variegated colouring effects. The aged antique appearance...
Fortis Antique Black Acid Stain is a concentrated penetrating reactive stain which chemically combines with cured concrete to produce permanent variegated colouring effects. The aged antique appearanc...
Fortis Antique Tan Acid Stain is a concentrated penetrating reactive stain which chemically combines with cured concrete to produce permanent variegated colouring effects. The aged antique appearance...
Fortis Antique Red Acid Stain is a concentrated penetrating reactive stain which chemically combines with cured concrete to produce permanent variegated colouring effects. The aged antique appearance...
Fortis Antique Green Acid Stain is a concentrated penetrating reactive stain which chemically combines with cured concrete to produce permanent variegated colouring effects. The aged antique appearanc...
FORTIS COAT 519 – A premium non-yellowing clear single pack polyurethane floor coating. Specifically designed for use on concrete and timber to provide a long-lasting protective coating that does not...
FORTIS COAT 526 is a premium water-based clear polyurethane designed to enhance the natural beauty of concrete and timber surfaces. Available in both Gloss and Satin finishes, it offers superior...
Concrete Shield™ CCA is a concentrated biodegradable organic acidic cleaning and etching solution for use before coating.
A single component adhesion promoter.
Fast setting Water-Based non-toxic PVA specifically designed for bonding MDF.
A Water-Based Non-Toxic melamine glue bonding melamine faced board in the manufacture of cabinets and drawers. Dries Clear.
A high moisture resistance Non-Toxic Water-Based PVA adhesive for interior and exterior applications.
Concrete Shield™ Grout 1000 is a high-performance grout for use with polished concrete and terrazzo floors.
FORTIS PRIME 520 water based polyurethane.
FORTIS AD5025-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 2-minute open time for finger jointing. It is used for fast processing of finger...
FORTIS AD5045-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 4-minute open time for finger jointing. It is used for fast processing of finger-jointin...
FORTIS AD5205-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 20 minute open time. It is used for fast processing glue laminated timber.
FORTIS AD5505-S is a single component, moisture curing structurally certified polyurethane timber adhesive with 50-minute open time. It is used where slower layup of the glue lamination is required. I...
Fortis Adhesives & Coatings Pty Ltd Fortis Adhesives & Coatings is an Australian-owned manufacturer specializing in high-quality adhesives and coatings. We offer a wide range of products, including adhesives, floor coatings, concrete …
Choosing the correct adhesive for woodworking — especially door, window, and stair construction — is essential to ensure longevity, easy-of-use, and the overall aesthetics of the project. There are a huge variety …
Concrete Surfaces often suffer from wear and tear, heavy traffic, abrasion, and impact, leading to deterioration over time. In environments like garages, industrial floors, warehouses, and even domestic spaces like carparks and …
Unprotected Concrete such as driveways, pavers, and floors can be easily damaged, with the most common causes including water damage and unwanted staining, as well as general wear and tear. Once the …
De-lamination of coatings can occur between the coating system and the substrate. Causes of de-lamination The possible causes for de-lamination are: Contamination Inadequate surface preparation Incompatibility 1. Contamination Contamination can be on …
Rejection, commonly known, as Silicon Effect is a pullback of a coating applied to a substrate. Rejection of coatings on floor surfaces is typically caused by contaminants. The most common contaminants are: …
Many of our colours are based on AS2700 range of colours to allow specifiers to select reference paint colours for industrial coatings. The colours displayed will differ depending upon the computer and …
The use of Fortis coatings across the varied climates of Australia does provide some challenges. To achieve the best coating, it is always best to follow the product's application guidelines. Temperature, humidity, …
What Causes Hot Tyre Staining (Paw Printing)? Tyres are made of a mixture of synthetic and natural rubbers, fillers and additives. The major fillers are carbon black and silica. Carbon black not …
For the flooring contractor hired to apply or repair a coating on a concrete floor, the range of tools and possible techniques available for surface preparation can be extensive. Surface preparation methods …
Comprehensive industrial epoxy floor coating systems designed for factories, carparks, and garages..
Performance polyurethane high build mortars that are chemical and thermal shock resistant..
When a superior bond strength is required Fortis recommend the use of Epoxy systems.
Epoxy and Polyurethane Thinners slow the cure of coatings and reduce the viscosity.
Extremely durable and hard wearing, suitable for concrete garages and workshops floors.
A long lasting Anti-graffiti coating to protect against unwanted graffiti.
Polyurethanes are the preferred choice for seamless waterproofing membranes.
Structural Polyurethane Lamination Adhesive for glulam producers.
The traditional way to stain concrete for a stunning effect is achieved with Concrete Acid Stains.
Concrete preparation is cleaning is crucial before applying any floor coatings.
Choose the right mixing tools and rollers to ensures coating application is done correctly.
BACK TO TOP
