FORTIS AD211-PS is a high tack solvent-based contact adhesive. FORTIS AD211-PS offers high initial grab and has been formulated for use in the bonding of polystyrene and other lightweight insulation materials.
Information | Applications | Specifications | Downloads
FORTIS AD211-PS is a high tack solvent-based contact adhesive with excellent substrate wetting. Suitable for Rapid lamination. Extremely high adhesion. Suitable for metal to polystyrene
Polychloroprene Rubber Adhesive
Sprayable Fast drying Excellent green strength Polystyrene foam safe
Construction, Truck, Bus & RV, Automotive & Marine, Industrial & Mining, Craft & Hobby, Shop Fit Out
Spray apply evenly to both surfaces that are to be bonded. Allow adhesive to evaporate until it is no longer wet to touch (~5 minutes). Join surfaces together before the end of the adhesive open time (~5-10 minutes). Apply as much pressure as possible to achieve the optimum bond strength. Fortis recommend that applicators carry out their adhesion test on their particular substrate before application. Fortis AD211-PS should not be applied at temperatures below 10°C. If applying to wood, the moisture of 8-10% and relative humidity of 60-70% are ideal application conditions. Final bond strength is achieved in 24 hours.
LIMITATIONS Coverage rate, open time, and press time are largely dependent on the type of material to be bonded, as well as the ambient conditions. Do not use below 10°C as condensed water may form on the adhesive film and prevent bonding.
Ensure the bonded surface is clean and free from dust, oil, and other foreign materials. Metal surfaces should be degreased with Fortis Sol-T Cleaner.
20L, 200L
Fortis AD211-PS Technical Data Sheet
Fortis AD211-PS Safety Data Sheet